High Quality Gloves Used For Laboratory Acrylic Glove Box And
Stainless Steel Glove Box
Introduction:
Right glove choosing is the key to protect operators in laboratory
who constantly contact with all kinds of chemicals like strong acid
and alkali and poisioning substances,sometimes high temperature
instruments such as heating containers or samples on electronic
oven causing injuries on skin leads to dry,peeling and itchy light
symptons or worse.
1.Injuries may caused during experiment.
Generally there are 3 types of injuries:
A.Injuries caused by chemicals.
B.Scald.
C.Cut while loading or unloading devices.
2.Glove class
According to material and processing, glove is classified to A,B,C.
Class A top 1 passing leakage testing before package, the safest
with lowest pinholes ratio.
3.Selection and use
A.Best protection.
2.Checking pinhole or wearness before operating.
3.Laying polluted glove in a pointed position.
4.Take off in proper way to avoid scecond harmness on skin or
clothes by poisioning substances.
5.Do not share to cut intercross infection.
6.Wash hands and get moistured before and after using.
7.Cover wounds before wearing gloves.
8.Contact your doctor if there is skin disorder.
| Advantage and disadvantage of gloves |
| Material | Advantage | Disadvantage |
| Natural Rubber | Low cost. Good physical property,cutting protection and
flexibility. | Easy to resolve and age.Bad blocking of grease or organic compound.
Risk on protain allergy. |
Nitrile Butadiene Rubber | Low cost. Good physical property,cutting protection and
flexibility. Wear and cut resistance. | Low protective of ketone,aromatic and medium polar compounds. |
| Chloroprene rubber | Good chemical resistance. Best resisting to oilness, nitride acid,
sulpheric acid, alkali, solvents, ketone, refrigerant, detergent.
Mid-range physical performance. | Expensive and wear resistance lower than natural rubber and nitrile
butadience.Do not use aromatic organic solvents. |
| Butyl | Flexible and excellant corrosion resistant to organic compounds
such as aniline and phenol, ethylene glycol ether Ketone and
Aldehyde | Expensive and lower protective to hydrocarbon, nonpolar solvents
including chlorocarbon or fluorocarbon. |
| Model | Spec. | Material | Diameter | Length | Thickness | Color | Origin | Application |
| X-S11 | 145*600 | Latex | 145mm | 600mm | 1.1mm | Yellow | China | Acrylic Glove Box |
| X-S13 | 145*800 | Latex | 145mm | 800mm | 0.8mm | Yellow | China | Acrylic Glove Box |
| P537 | 150*360 | Butyl | 150mm | 360mm | 0.8mm | Yellow | China | Acrylic Glove Box |
| A103 | 150*700 | Rubber | 150mm | 700mm | 0.8mm | Yellow | UK | Acrylic Glove Box |
| A105 | 180*700 | Rubber | 150mm | 700mm | 0.8mm | Yellow | UK | Non glove box |
| H503 | 200*800 | Rubber | 200mm | 800mm | 1.1mm | Black | China | Stainless steel glove box |
| H107 | 200*800 | Rubber | 200mm | 800mm | 0.8mm | Black | UK | Stainless steel glove box |
| Y603 | 200*813 | BUNa-N | 200mm | 800mm | 0.8mm | Black | China | Stainless steel glove box |
| Y917 | 200*800 | Butyl | 200mm | 800mm | 0.8mm | Black | UK | Stainless steel glove box |
| T-923 | 200*813 | Neoprene | 200mm | 800mm | 0.8mm | Black | UK | Stainless steel glove box |
1. Common model X-S11, X-S13 and P103 for acrylic glove box.
Imported P103 with best quality.
Selection Tips
2. H503,H107,Y603,Y917 applied for both stainless steel glove box
and purification glove box. For sercurity concern, Y603 & Y917 are
required for corrosive circumstance.
3. Glove is a consuming product. Sales by pair.
4. Special model P537 with 360mm length for mini glovebox.
| Natural Rubber | Butyl Rubber | Chloroprene Rubber | Nitrile Rubber |
| Nonorganic Acid | Good | Good | Excellent | Excellent |
| Organic Acid | Excellent | Excellent | Excellent | .... |
| Corrosion Substance | Excellent | Excellent | Excellent | Good |
| Methanol | Excellent | Excellent | Excellent | Excellent |
| Methylbenzene | Bad | OK | OK | Bad |
| Petroleum distillate | Excellent | OK | Excellent | Excellent |
| Ketone | OK | Excellent | Good | OK |
| Paint Thinner | OK | OK | Do not recommend | OK |
| Benzene | Do not recommend | Do not recommend | No | OK |
| Formaldehyde | Excellent | Excellent | Excellent | OK |
| Ethyl Acetate | OK | Good | Good | OK |
| Fax | Bad | Good | Excellent | Excellent |
| Phenol | OK | Good | Excellent | Do not recommend |
| Wearness | .... | Good | OK | Excellent |
| Spur | Excellent | Good | Excellent | Excellent |
| Heat | Excellent | Bad | Excellent | OK |
Company Information
Changsha MITR instrument & equipment Co., Ltd. specializes in
designing, manufacturing and selling experimental equipment.
Supported by the state key laboratory of Central South University
Powder Metallurgy with Hunan University, Shanghai Jiao tong
University and other well-known universities to maintain long-term
close technical exchanges and product development cooperation.
The high-tech talents in our company are: doctor, master, eight
senior engineer,eight senior technician, ten engineer,six
technician.The main business is the R&D, production and sale of
experimental equipment and related technical consultation
services.The main products are two serires of ball mill and glove box and
their technical services
